Used & Discontinued MerchandiseGet a great deal on used and discontinued merchandise; a current list is described below. These items change all the time. Bookmark it and check back often. If something catches your eye, call us right away. These are usually one-of-a-kind items, so, it may not be here tomorrow! Manufacturer's part number: #6100-1205-9
Binks Model 7 gun
This Binks model #7 gun is brand new. Includes 33ss fluid nozzle x 33pm air-cap setup. (if you would like a different setup, please inquiry--parts cost extra. Manufacturer's part number: #83-5807
Binks 30-Gallon Pressure Tanks
This Binks 30-gallon pressure tank / pot is ASME certified and includes a pneumatic air-operated agitator and single air-regulator. Set up for bottom-feed, but can be top-fed with minor modification. Nearly perfect condition; just has some residue from previous materials on it.
Manufacturer's part number: #239786
Graco automatic airless spray gun
This Graco automatic spray gun is perfect for that fine finish in your automatic airless spray system. Note: does not include required manifold.
Manufacturer's part number: #288048
Graco Automatic Airless Spray Gun
For airless spraying of paints and coatings. Mounting manifolds must be ordered separately.
Manufacturer's part number: #233061
Graco 2k Monitor for non-IS meters
Moderately used; a few scrapes. Fully functional.
Manufacturer's part number: #325668
Nordson Air-Assisted Airless Automatic Gun
1500psi Nordson "Prism" air-assisted airless automatic high-pressure spray gun. Demo unit, used only once, is in great condition. Manufacturer's part number: #234638
Graco XT conventional air-spray gun
This Graco-XT model air-spray gun, conventional, is a slight-used model. Was used only once as a demonstration model, so practically brand new! Includes 1.4 nozzle.
Manufacturer's part number: #245252
Graco Electrostatic Grounded Fluid Hose
Buying a new electrostatic gun? A grounded fluid hose is used for water-bourne materials (unnecessary for solvent-bourne). Used in demonstrations, this hose might have some paint on it, but, it's clean on the inside (where it counts), and is perfectly good for full production use. Manufacturer's part number: #876020
Binks Infinity Air Motor
The air motor only, this goes to a 23:1 model infinity pump. Great to have around as a spare when you're down.
Manufacturer's part number: #xxxxxx
Graco Elevator
This Graco 55-gallon elevator assembly includes lifting hoops, and one lid. Very lightly used, and guaranteed!
Manufacturer's part number: #222790
Graco Check-Mate 450 Lower Only
Moderately used, would be a great backup for your CheckMate "Shovel Pump." Manufacturer's part number: #651790-A3R-B
Aro low-pressure fluid regulator
This Aro fluid regulator is for low-pressure (500psi inlet max, regulates between 30-200psi) applications. It has 3/8" ports, and regulates fluid flow to 3GPM. Nearly brand-new condition. Manufacturer's part number: #246190
Graco Helical Fluid Meter
HG6000 meter is the "Standard Resolution " model with 0.013 to 6.0 gpm (50 to 22,712 cc/min) Flow Range, 180°F (82°C) Maximum Operating Temperature.
Manufacturer's part number: #234266
Graco Air-Operated Fluid Pressure Regulator
Pneumatic 5000 psi inlet (36 MPa, 360 bar) regulates outbound fluid pressure down to between 70-900 psi (0.5-6 MPa, 5-60 bar). If you need a guage, order part # 118340. Practically brand new!
|